Material Handling System

Automation of material handling system consist of conveyors. Due to manual operation, resulting in loss of production, loss of time, extra manpower & during stoppage of system difficult to go to root cause analysis at the time of troubleshooting.

Automation of the system follow the sequential operations, interlocks with sensors, traffic management & recipe management. Material over the conveyors can be detected by using bar code to ACCEPT / REJECT. This automation can be achieved by using PLC, VFD, HMI & SCADA.

Reports can be generated & sent the same reports to management via email at specific defined time interval.

Features:

1. Auto / manual facility. In Auto mode, the system works as per the requirement without much of the manual intervention.
2. HMI / SCADA for graphical representation.
3. Report generation & sending the same reports to management.
4. Speed of the conveyor can be varied by using a Variable frequency drive & can be set by using HMI. Production rate can be defined & increased to the best capacity by using the speed variation of conveyors.
5. Traffic management by using sensors at appropriate locations.
6. Alarm messages can be displayed & viewed on HMI / SCADA & hence easy maintenance/troubleshooting.